Numerous consumers complain that their devices frequently drop or are unable to identify the 5GHz network. The 5GHz band, which is meant to provide greater speeds, is either inexplicably absent or unreliable, while the 2.4GHz band appears to be working well. You can attempt a few efficient solutions, so don’t worry.
Let’s begin with the most straightforward:
Look for a Linksys Velop firmware update. The 5GHz band is frequently affected by firmware issues, and Linksys frequently provides updates to address these issues and enhance stability. You may use the online interface or the Linksys app to upgrade your firmware. To ensure you don’t miss any upcoming patches, make sure automatic updates are enabled.
Reset Linksys Velop system is the next step if changing the firmware doesn’t resolve the problem. Any setup errors that could be impacting the 5GHz band can be fixed with a factory reset. Reconfigure your mesh network using the app after holding down the reset button until the light turns red. Just be careful to first backup any customized settings.
Placement is another stage that is frequently disregarded. The 5GHz spectrum is more susceptible to interference from walls or other devices than the 2.4GHz frequency. If at all feasible, try moving nodes to guarantee line-of-sight and lessen signal obstruction.
Are you still stuck? Verify that your client device is not limited to 2.4GHz mode and see whether it supports 5GHz.
By taking these actions—updating the firmware on your Linksys Velop, placing smart nodes, and resetting your Linksys Velop—you stand a good chance of getting your 5GHz band back and having fast connectivity once more.
Visit our website to know more about linksys velop 5ghz band not working issue.
